Why carbon steel needs a different care routine
The GARBERG Black Carbon Steel blade is made from high-carbon steel, which is easier to sharpen than stainless steel but also more reactive to moisture. Morakniv applies a DLC (Diamond-Like Carbon) coating that provides some protection from rust, but it does not make the blade maintenance-free. The exposed edge and spine remain vulnerable, and any area where the coating wears will need attention.
This knife is built for hard use—batoning, carving, fire prep—so your care routine should match that reality. The goal is not to keep it pristine but to keep it functional and free of deep corrosion that can weaken the edge or damage the grind.
What the GARBERG Black brings to the field
- GARBERG - BLACK CARBON STEEL: The blade has a DLC coating: a dark, hard, scratch-resistant coating that helps protect the carbon steel from corrosion. The coating reduces rust risk but does not eliminate it, especially at the edge and spine. Your care routine should preserve the coating and focus on exposed steel.

GARBERG - BLACK CARBON STEEL - GARBERG - BLACK CARBON STEEL: Carbon is easier to hone or sharpen than stainless steel. You can maintain the edge with simple tools, but frequent sharpening removes steel and can wear the coating near the edge, so hone lightly and sharpen only when needed.
- GARBERG - BLACK CARBON STEEL: The blade has a Scandi-grind profile that makes it easy to keep sharp and a ground spine compatible with a fire starter. The Scandi grind simplifies sharpening, and the 90-degree spine is a functional feature you should not round off during maintenance.
A simple field and home care routine
Follow these steps after each use, especially when the knife has been exposed to moisture, sap, or food acids. Adjust frequency based on conditions—wet coastal trips demand more attention than dry winter outings.
- Clean and dry immediately after use: Wipe the blade with a damp cloth to remove dirt, sap, and food residue. Dry thoroughly with a dry cloth, paying attention to the edge, spine, and handle junction. Do not leave the knife wet in its sheath.
- Apply a thin coat of oil to the blade: Use a food-safe oil or a dedicated knife oil. Apply a light film to the carbon steel areas, especially the edge and any exposed steel. The DLC coating does not need heavy oil, but a thin layer helps protect the steel beneath and at the edge.
- Store the knife dry and out of the sheath for long periods: Leather and polymer sheaths can trap moisture. For long-term storage, keep the knife in a dry place, ideally outside the sheath, or ensure the sheath is completely dry before inserting the knife.
- Hone regularly, sharpen sparingly: Use a ceramic rod or a fine stone to maintain the Scandi edge. A few light passes are usually enough. Sharpen only when the edge fails to bite or shows visible rounding. Avoid aggressive sharpening that removes the DLC coating unnecessarily.
- Address rust spots early: If you see a speck of rust, remove it with a fine abrasive pad or a rust eraser, then clean and oil the area. Early removal prevents pitting and keeps the blade smooth.
Patina: what to expect and how to manage it
Carbon steel develops a patina—a dark, stable oxide layer—as it reacts with moisture, acids, and air. Patina is not rust; it is a form of protection that can actually reduce further corrosion. The GARBERG Black's DLC coating may slow patina formation on covered areas, but the exposed edge will likely darken with use.
You can encourage an even patina by wiping the blade with a mild acid (like vinegar) and letting it sit briefly before rinsing and oiling, but this is optional. If you prefer a polished look, you can remove patina with a metal polish, but it will return with use. Many bushcrafters accept patina as a sign of a working knife.
Rust prevention habits that make a difference
Small habits go a long way toward keeping carbon steel rust-free, especially in wet or coastal environments.
- Dry the knife before sheathing: Never put a wet knife into its sheath. Moisture trapped against the blade is the fastest route to rust.
- Oil after every wet outing: Even if the blade looks dry, a thin coat of oil after exposure to rain, snow, or saltwater adds a protective barrier.
- Keep the sheath clean and dry: Dirt and moisture in the sheath can transfer to the blade. Clean the inside of the sheath periodically and allow it to dry completely.
- Avoid prolonged storage in damp environments: Basements, garages, and damp tents are not ideal for long-term storage. Use a dry cabinet or a well-ventilated area.
Sheath choices and their care implications
- GARBERG - BLACK CARBON STEEL: The leather sheath is made from 3mm thick high quality black leather that offers a sleek appearance and heavy-duty support for the blade. Leather can absorb moisture, so extra care is needed to keep the sheath dry and prevent rust transfer to the blade.
- GARBERG - BLACK CARBON STEEL: Multi-Mount is a versatile mounting solution for Morakniv Garberg, compatible with the MOLLE standard mounting system. The Multi-Mount sheath allows quick attach/detach and can be mounted on vehicles or packs, but it also exposes the knife to the elements more readily, so post-use drying and oiling become even more important.
Sharpening without harming the coating
The Scandi grind on the GARBERG Black is easy to sharpen, but the DLC coating near the edge requires some care. Use a sharpening method that removes minimal steel: a fine diamond stone or ceramic rod, used with light pressure and a consistent angle. Avoid coarse stones unless you are repairing damage. After sharpening, clean off any metal dust and oil the edge.
If you use a guided sharpening system, ensure it does not clamp directly on the coated blade in a way that could scratch the DLC. Tape the blade with painter's tape if needed. Remember that the goal is a working edge, not a polished bevel.
When to seek warranty service
Morakniv guarantees that all knives are free from defects in material, construction or workmanship for the life of the product under normal use according to the care guidelines on their website. If the knife is defective due to materials or workmanship, they will repair it at no cost or replace it with a new knife of the same or an equivalent model.
Rust caused by neglect or improper care is not a defect. However, if you notice a manufacturing flaw—such as a loose handle, a warped blade, or a coating defect—contact the retailer or Morakniv directly.
- Persistent rust despite proper care: If rust keeps returning even with regular oiling and drying, it may indicate a coating defect or a steel issue. Document your care routine and reach out.
- Handle or sheath failure: A loose handle or a sheath that fails under normal use may be covered. Stop using the knife if the handle becomes unsafe.


