How to Clean Your UCO Candle Lantern (6 Steps)

Quick Answer

Clean your UCO candle lantern by disassembling it, wiping soot from the glass chimney and reflector, and replacing the candle. Use the Original Lantern Refurbishment Kit to restore worn parts.

How to Clean Your UCO Candle Lantern in 6 Steps

1. 1. Extinguish and Cool Down: Make sure the candle is completely out and the lantern is cool to the touch. Never attempt to clean a hot lantern. Common mistake: cleaning while warm can crack the glass chimney.
2. 2. Disassemble the Lantern: Remove the top cap and lift out the glass chimney. Gently pull the candle holder and spring mechanism out of the base. Checkpoint: keep track of small parts like the spring and flame adjuster.
3. 3. Clean the Glass Chimney: Wipe the glass chimney with a soft cloth dipped in warm soapy water. For stubborn soot, let it soak for 5 minutes before wiping. Rinse and dry completely. Common mistake: using paper towels can leave lint; a microfiber cloth works best.
4. 4. Wipe the Reflector and Base: Use a dry cloth to remove soot from the aluminum reflector and base. Avoid getting water inside the spring mechanism. Checkpoint: if the reflector is heavily stained, a mild glass cleaner on the cloth is safe.
5. 5. Inspect and Replace Worn Parts: Check the spring and flame adjuster for rust or bending. If they look worn, install the ORIGINAL LANTERN REFURBISHMENT KIT. Common mistake: ignoring a weak spring can cause the candle to sit unevenly and produce excess soot.
6. 6. Reassemble and Test: Place the candle in the holder, slide the glass chimney back over it, and secure the top cap. Light the candle and check for an even, steady flame. Checkpoint: if the flame flickers or smokes, the chimney may not be seated properly.

Products That Help

• Original Candle Lantern: The UCO Original Candle Lantern includes a windproof glass chimney and one long-burning emergency candle that provides up to 15 hours of light. Knowing your lantern's design helps you clean the glass chimney without damaging the metal housing.

  

• ORIGINAL LANTERN REFURBISHMENT KIT: The ORIGINAL LANTERN REFURBISHMENT KIT includes all parts needed to restore your lantern to like-new condition. If the spring or flame adjuster is worn after years of use, this kit saves you from buying a whole new lantern.