How to Install the Multi-Mount Kit for Kansbol

Quick answer

Install the Multi-Mount Kit for Kansbol by first attaching the base to your belt, MOLLE webbing, or a flat surface, then snapping the knife sheath onto the base. No tools needed.

Step-by-step installation

1. Step 1: Choose your mounting surface: Decide where you want the knife: on a belt, MOLLE webbing, or a flat surface like a backpack strap or vest. The kit works with all three. Check that the surface is clean and dry. Dirt or moisture can weaken the grip of the mounting straps.
2. Step 2: Attach the Multi-Mount base: For belt: slide the belt loop through the base slots, then thread your belt through the loop. For MOLLE: weave the mounting straps through the base and your webbing, then cinch tight. For flat surface: wrap the straps around the surface and through the base, then secure. A common mistake is over-tightening the straps, which can deform the base and make sheath attachment difficult. Snug is enough.
3. Step 3: Attach the knife sheath: Align the sheath's mounting holes with the base's prongs. Press firmly until you hear a click. To detach, press the release tab on the base and pull the sheath away. If the sheath does not click, check that the base is not twisted. A misaligned base prevents secure locking.
4. Step 4: Test the draw and reholster: With the knife in the sheath, practice drawing and reholstering several times. The motion should be smooth and require little force. If the draw is stiff, the base may be too tight against the surface. Loosen the straps slightly and re-test.

Product facts

• MULTI-MOUNT KIT FOR KANSBOL: The Morakniv Kansbol Multi-Mount Knife Accessory Kit includes a belt loop, Multi-Mount base, and mounting straps. Everything you need is in one box; you can switch between belt, MOLLE, and surface mounts without extra hardware.